subject
Engineering, 03.04.2020 02:33 zayeboyd4971

A 5.1 kΩ resistor has burned out in a circuit. You are to replace it with one of like ohmic e. same resistance). If the resistor should carry 15 mA, which of the following standard value (i. resistors should you use? Verify your answer mathematically. A) 5.1 kQ, 2 W
B) 5.1 kW, 1 W
C) 5.1 kn, 5 W
D) 5.1 k0, 1.2 W

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
question
Engineering, 04.07.2019 18:10
Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer
Answers: 2
question
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
question
Engineering, 04.07.2019 19:20
To save energy, the air supply to a 2000 ft office has been shut off overnight and the room temperature has dropped to 40°f. in the morning, the thermostat is reset to 70°f and warm air at 120 f begins to flov in at 200ft'/min. the air is well mixed within the room, and an equal mass flow of air at room temperature (changing with time) is withdrawn through a return duct. the air pressure is nearly 1 atm everywhere. ignoring heat transfer with the surroundings and kinetic and potential energy effects, estimate how long it takes for the room temperature to reach 70°f. plot the room temperature as a function of time.
Answers: 1
You know the right answer?
A 5.1 kΩ resistor has burned out in a circuit. You are to replace it with one of like ohmic e. same...
Questions
question
Mathematics, 06.08.2021 04:50
question
Chemistry, 06.08.2021 04:50
question
Mathematics, 06.08.2021 04:50
Questions on the website: 13722367