Engineering, 03.04.2020 20:22 KaseyT

A two pole, 850 kVA, 2400 Vrms, 60 Hz, three-phase synchronous machine acting as a generator has a syn-chronous reactance of 7.5 a and you can assume the armature resistance to be negligible. It operates at the rated open circuit voltage with a field current of 175 A. Analytically find: (a) 10pts. The magnitude of the field-to-armature mutual inductance. (b) 10pts. The internal voltage value for a load of 750 kW at unity power factor. (c) 10pts. Using a MATLAB script m-file (not a Simscape simulation) create a plot for the constant load power in (b) while varying the field current to archive a maximum and minimum values of 850 kVA leading/lagging. Find the value of the field current that produces the minimum terminal current value. Rel. Date: 3/22/20 Michigan Technological University 2 of 3

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 19:10

Starting wih an energy balance on a rectangular volume element, derive the one- dimensional transient heat conduction equation for a plane wall with constant thermal conductivity and no heat generation.

Answers: 1

Answer

Engineering, 04.07.2019 19:10

Acircular aluminum shaft mounted in a journal is shown. the symmetric clearance gap between the shaft and journal is filled with sae 10w-30 oil at t 30°c. the shaft is caused to turn by the attached mass and cord. develop and solve a differential equation for the angular speed of the shaft as a function of time.

Answers: 2

Answer

Engineering, 06.07.2019 02:30

1in2 processor chip can be modelled as an isothermal plane wall of silicon, isothermal on both sides. the power input to the bottom of the plane wall, or the processing power of the chip, often called the thermal design power (tdp), is 100w. assume the periphery is adiabatic. the silicon is 400 microns thick. the temperature at the junction, or in this case on the bottom of the isothermal plane wall, is 85°c. what is the top surface temperature, assuming that the only mode of heat transfer is conduction

Answers: 1

Answer

Engineering, 06.07.2019 03:10

Explain the strain-hardening phenomenon on the basis of dislocation - dislocation strain field interactions. also, briefly describe what generally happens to the ductility of a metal that has been strain hardened (i.e. does strain hardening make a metal more ductile or

Answers: 3

Answer

You know the right answer?

A two pole, 850 kVA, 2400 Vrms, 60 Hz, three-phase synchronous machine acting as a generator has a s...

Questions