subject
Engineering, 03.04.2020 22:30 kc22

You are assessing the performance of a CSTR that is 60 m long, 5 m wide, and 2 m deep. It receives 250 m3/d of wastewater with a BOD5 of 325 mg-BOD5/L. The following microbial kinetic constants were determined in the lab: Ks = 76 mg-BOD5/L kd = 0.08 d-1 μm = 1.1 d-1 Y = 0.80 mg-VSS/mg-BOD5 (a) What is the efficiency of the CSTR in terms of BOD5 removal?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
question
Engineering, 04.07.2019 18:10
The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false
Answers: 2
question
Engineering, 04.07.2019 19:10
An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed
Answers: 3
question
Engineering, 04.07.2019 19:20
Acircular pipe of 30mm outside diameter is placed in an airstream at 30 c and latm pressure. the air moves in cross flow over the pipe at 20 m/s, while the outer surface of the pipe is maintained at 110 c. what is the drag force exerted on the pipe per unit length? what is the rate of heat transfer from the pipe per unit length?
Answers: 1
You know the right answer?
You are assessing the performance of a CSTR that is 60 m long, 5 m wide, and 2 m deep. It receives 2...
Questions
question
Mathematics, 30.01.2020 20:56
Questions on the website: 13722363