Engineering, 03.04.2020 23:59 frisha
A 1.5-in. steel plate and a 0.75-in. cast-iron plate are compressed with one bolt and nut. The bolt is ½ in-13 UNC. Determine (i) Bolt Stiffness and (ii) stiffness of the members (iii) The load factor for joint separation if an external load of 6 kip is applied
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
Engineering, 04.07.2019 18:10
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
You know the right answer?
A 1.5-in. steel plate and a 0.75-in. cast-iron plate are compressed with one bolt and nut. The bolt...
Questions
Computers and Technology, 17.09.2019 00:10
Computers and Technology, 17.09.2019 00:10
