subject
Engineering, 04.04.2020 01:27 jack487

Liquid water is fed to a boiler at 24°C and 10 bar and is converted at constant pressure to saturated steam. (a) Use the steam tables to calculate ΔĤ(kJ/kg) for this process, and then determine the heat input required to produce 15,800 m3/h of steam at the exit conditions. Assume the kinetic energy of the entering liquid is negligible and that steam is discharged through a 15-cm ID pipe. (b) How would the calculated value of the heat input change if you did not neglect the kinetic energy of the inlet water and if the inner diameter of the steam discharge pipe were 13 cm (increase, decrease, stay the same, or no way to tell without more information)?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
question
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
question
Engineering, 04.07.2019 18:10
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
question
Engineering, 04.07.2019 19:10
Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m
Answers: 1
You know the right answer?
Liquid water is fed to a boiler at 24°C and 10 bar and is converted at constant pressure to saturate...
Questions
Questions on the website: 13722362