A stud wall is to be used as a bearing wall in a wood-frame building. The wall carries axial loads caused by roof dead and live loads. Studs are 2 x 4 construction grade Hem-Fir and are located 16-in o. c. Studs have seathing attached. Cm=1.0, Ct=1.0, and Ci=1.0. Find: the maximum load per lineal foot of wall using ASD for each load combination if the wall height is a. 8ft b. 9ft c. 10ft

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?