subject
Engineering, 04.04.2020 03:02 dazesreplayy7580

For the standard negative feedback loop P(s)=1/(s+1), C(s)=K(s+1)/s, F(s)=1 unity feedback, we would like to tune the PI controller gain K for a crossover frequency of 2 rad/s. What would be the value of K?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
question
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
question
Engineering, 04.07.2019 18:10
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
question
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
You know the right answer?
For the standard negative feedback loop P(s)=1/(s+1), C(s)=K(s+1)/s, F(s)=1 unity feedback, we would...
Questions
question
English, 25.09.2019 03:00
question
Social Studies, 25.09.2019 03:00
Questions on the website: 13722360