Engineering, 04.04.2020 06:56 abalth8463

Hot water at 50 ℃ is routed from one building in which it is generated to an adjoining building in which it is used for space heating. Transfer between the buildings occurs in a steal pipe (k = 60W/m ∙ K) of 100-mm outside diameter and 8-mm wall thickness. During the winter, representative environmental conditions involve air at T[infinity] = −5℃ and V = 3m/s in cross flow over the pipe. Account for the convection resistance associated with water flow at a mean velocity of um = 0.5m/s in the pipe. What is the heat loss per unit length of pipe?

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

Answer

Engineering, 03.07.2019 19:30

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line

Answers: 3

Answer

Engineering, 04.07.2019 16:10

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

Answer

You know the right answer?

Hot water at 50 ℃ is routed from one building in which it is generated to an adjoining building in w...

Questions