Engineering, 04.04.2020 08:30 liloleliahx2
A pressure vessel of 250-mm inner diameter and 6-mm wall thickness is fabricated from a 1.2-m section of spirally welded pipe AB and is equipped with two rigid end plates. the gage pressure inside the vessel is 2 MPa, and 45-kN centric axial forces P and P' are applied to the end plates. Determine a) the normal stress perpendicular to the weld b) the shearing stress parallel to the weld.
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
Engineering, 04.07.2019 18:10
What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information
Answers: 3
Engineering, 06.07.2019 03:10
Explain the strain-hardening phenomenon on the basis of dislocation - dislocation strain field interactions. also, briefly describe what generally happens to the ductility of a metal that has been strain hardened (i.e. does strain hardening make a metal more ductile or
Answers: 3
Engineering, 06.07.2019 03:20
What is the maximum height from which a mass of 30 kg can fall on to a flange on the lower end of a vertical rod of length 1.0 m and diameter 20 mm, the upper end being rigidly fixed, if the stress in the rod is not to exceed 80 mpa? the tensile modulus of the rod is 200 gpa.
Answers: 3
You know the right answer?
A pressure vessel of 250-mm inner diameter and 6-mm wall thickness is fabricated from a 1.2-m sectio...
Questions
Mathematics, 04.03.2021 04:40
History, 04.03.2021 04:40
English, 04.03.2021 04:40
Mathematics, 04.03.2021 04:40
English, 04.03.2021 04:40
English, 04.03.2021 04:40
Business, 04.03.2021 04:40
Mathematics, 04.03.2021 04:40
