A single square-thread screw has an input power of 3 kW at a speed of 1 rev/s. The screw has a diameter of 40 mm and a pitch of 8 mm. The frictional coefficients are 0.18 for the threads and 0.09 for the collar, with a collar friction radius of 50 mm. Find the axial resisting load F and the combined efficiency of the screw and collar if the screw is raising the load.

Axial Resisting Load, F = 31.24kN

Efficiency = 16.67%

Explanation:

Given

Input Power = P,in = 3kW = 3,000W

Speed, S = 1rev/s

Pitch, p = 8mm

Thread frictional coefficient = μt = 0.18

Collar frictional coefficient = μc = 0.09

Friction radius of collar, Rc = 50mm

First, we calculate the torque while the load is being lifted in terms of 'F'.

This is calculated by

T = ½FDm[1 + πDmμt]/[πDm - μtp]

By substituton.

T = ½F(40-4)[1 + π(40-4)0.18]/[π(40-4) - 0.18 * 8]

T = 18F(1 + 6.48π)/(36π - 1.44)

T = 3.44F.Nmm

T = 3.44 * 10^-3F Nm

Then we calculate the torque due to friction from the collar

T = Fμc * Rc

T = F * 0.09 * 50

T = 4.5F. Nmm

T = 4.5 * 10^-3F Nm

Then, we calculate the axial resisting load 'F' by using the the following power input relation.

P,in = Tw

P,in = (T1 + T2) * 2πN

Substitute each value

3,000 = (3.44 + 4.5) * 10^-3 * F * 10^-3 * 2 * π * 2

F = 3000/((3.44 + 4.5) * 10^-3 * 10^-3 * 2 * π * 2

F = 31,247.69N

F = 31.24kN

Hence, the axial resisting load is

F = 31.24kN

Calculating Efficiency

Efficiency = Fp/2πP

Efficiency = 2Fp/P,in

Substitute each value

Efficiency = 2 * 31,247.69 * 8 * 10^-3/3000

Efficiency = 0.166654346666666

Efficiency = 16.67%

the correct answer is c.stops after infancy and childhood.

myelin is the substance of the central nervous system (cns) that insulates nerve cell axons to increase the speed at which nerve impulse travels. myelination is a process of myelin formation. this process occurs postnatally, begins in the embryo during the midst of early development and finishes after birth.