The diameter, d, of bubbles produced by a bubble-making toy depends on the soapy water viscosity μ, density rho, and surface tension σ, the ring diameter, D, and the pressure differential Δp, generating the bubbles. Use dimensional to find the Π parameters that characterize this phenomenon.

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Explain in your own word the concept of a solid solution, in alloys, and how it can be created.