subject
Engineering, 07.04.2020 18:50 jadfavors4321

In a constant-head permeability test in the laboratory, the length of the soil specimen is 275 mm and its cross sectional area is 125 cm2. If the permeability of the soil is 0.012 cm/sec, and a flow rate of 150 cm3/min must be maintained through the soil specimen, determine the head difference across the soil specimen and the discharge velocity

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 19:10
What is the main objective of using reheat rankine cycle?
Answers: 3
question
Engineering, 04.07.2019 19:10
Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m
Answers: 1
question
Engineering, 04.07.2019 19:10
Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.
Answers: 2
question
Engineering, 06.07.2019 02:30
Plot schematically the tensile stress versus strain curves for a typical thermoplastic material at a temperature below its glass transition temperature (tg and at a temperature above its tg, respectively. do the same for a typical thermosetting material. list in a table any differences or similarities between the two materials at t> tg and t < tg, respectively, and relate them to the structures of the two types of polymers
Answers: 3
You know the right answer?
In a constant-head permeability test in the laboratory, the length of the soil specimen is 275 mm an...
Questions
question
Social Studies, 05.03.2021 01:00
question
Mathematics, 05.03.2021 01:00
Questions on the website: 13722360