Engineering, 07.04.2020 21:16 animelover730
Shows a horizontal ring main, which consists of a continuous loop of pipe, such as might be used for supplying water to various points on one floor of a building. Water enters the main at A at 50 psig, and is discharged at B and C at rates of 20 gpm and 60 gpm, respectively. Tests on the particular pipe forming the main show that the frictional pressure drop (psi) is given by –Δp = 0.0002 Q2L, where L is the length of pipe in feet and Q is the flow rate in gpm. Estimate the flow rate in the section AC and the pressure at B. Was the flow during the tests laminar or turbulent?
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
You know the right answer?
Shows a horizontal ring main, which consists of a continuous loop of pipe, such as might be used for...
Questions
History, 25.02.2020 21:10
Mathematics, 25.02.2020 21:10
Health, 25.02.2020 21:10
Mathematics, 25.02.2020 21:10
