Engineering, 07.04.2020 23:41 destinybonmer
15 cm × 15 cm circuit boarddissipating 20 W of power uniformly is cooled by air, which approached the circuit board at 20C with a velocity of 6 m/s. Assume the flow to be turbulent, since the electronic components are expected to act as turbulators. Disregard any heat transfer from the back surface of the board, and suppose that radiation heat transfer is negligible. Evaluate thermal properties of the air at a film temperature of 27C. Determine the surface temperature (C) of the electronic components at the following locati
Answers: 2
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
15 cm × 15 cm circuit boarddissipating 20 W of power uniformly is cooled by air, which approached th...
Mathematics, 11.06.2021 19:40
Chemistry, 11.06.2021 19:40
Mathematics, 11.06.2021 19:40
Social Studies, 11.06.2021 19:40
Mathematics, 11.06.2021 19:40
Mathematics, 11.06.2021 19:40
English, 11.06.2021 19:40
Mathematics, 11.06.2021 19:40
Mathematics, 11.06.2021 19:40