Engineering, 08.04.2020 01:56 sydsunkae14m
You are designing a cross-current extraction process to remove an impurity, A, from water (W) using pure ether (E). Your goal is to take an aqueous feed stream (2000 kg/hr) with 45 wt% A and reduce it to 10 wt% A. At each stage, 2000kg/hr of pure E enters the unit. How many stages will you need
Answers: 1
Engineering, 04.07.2019 18:10
What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information
Answers: 3
Engineering, 04.07.2019 18:20
For each of the following process: a) sketch the p-v diagram, b)sketch t-s diagram, c) sketch t-v diagram, d) sketch the boundary work on one of the diagrams (a, b or c) and e) sketch the reversible heat transfer on one of the diagrams (a, b or c): 1- isobaric process from compressed liquid to superheated vapor 2- isothermal process from compressed liquid to superheated vapor 3- isentropic process from compressed liquid to superheated vapor
Answers: 3
Engineering, 04.07.2019 19:10
Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.
Answers: 2
Engineering, 04.07.2019 19:10
Asteel wire of 2 mm diameter is fixed between two points located 2 m apart. the tensile force in the wire is 250n, if its density of steel is given by 7830 kg/m3 the fundamental frequency of vibration hz? ?
Answers: 3
You are designing a cross-current extraction process to remove an impurity, A, from water (W) using...
English, 20.09.2019 11:30
Chemistry, 20.09.2019 11:30
Mathematics, 20.09.2019 11:30
Health, 20.09.2019 11:30
English, 20.09.2019 11:30
Mathematics, 20.09.2019 11:30
Geography, 20.09.2019 11:30
History, 20.09.2019 11:30
Health, 20.09.2019 11:30
English, 20.09.2019 11:30
Biology, 20.09.2019 11:30
Health, 20.09.2019 11:30
Mathematics, 20.09.2019 11:30