subject
Engineering, 08.04.2020 04:26 krystalhurst97

If we have silicon at 300K with 10 microns of p-type doping of 4.48*10^18/cc and 10 microns of n-type doping at 1000 times less than the p-type doping, what is the resistance in ohms outside the depletion region on the n side of the junction. Use three significant digits and fixed point notation. The diode is square with an edge length of 60 microns, with a bias of 0.44V. Assume p and n mobilities are 500 & 1500 cm^2/(V*s) respectively. Correct 24.9

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
question
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
question
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
question
Engineering, 04.07.2019 19:10
What are the major differences between injection molding and extrusion?
Answers: 2
You know the right answer?
If we have silicon at 300K with 10 microns of p-type doping of 4.48*10^18/cc and 10 microns of n-typ...
Questions
question
Mathematics, 15.12.2020 20:30
question
Mathematics, 15.12.2020 20:30
question
Social Studies, 15.12.2020 20:30
question
Mathematics, 15.12.2020 20:30
question
Chemistry, 15.12.2020 20:30
Questions on the website: 13722367