On 38
Which of these is not an implementation of a Failure Mode and Effects Analysis?
red
ed out of
lag
Ton
Select one:
O a. Define and prioritize actions.
O b. Identify environmental impacts.
c. Identify failure modes.
O d. Evaluate the effects on the system.
o e. Track corrective actions.

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um