subject
Engineering, 09.04.2020 22:18 shanicar33500

Air flows steadily through a converging-diverging nozzle with a throat area equal to 1.395 in2 , and an exit area equal to 2.79 in2 . A normal shock wave stands at the exit plane of the nozzle. The exiting jet flows into a large room, where the pressure is equal to 14.7 psia. The temperature of the air in the exit jet stream, just after the nozzle exit, is measured at 87 deg F. Calculate the mass flow rate through the nozzle. Calculate the pressure, temperature and velocity at a location in the nozzle where the flow area is equal to 5.58 in2 .

keep in English units

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
question
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
question
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
question
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
You know the right answer?
Air flows steadily through a converging-diverging nozzle with a throat area equal to 1.395 in2 , and...
Questions
question
Mathematics, 12.07.2019 20:00
question
Chemistry, 12.07.2019 20:00
question
Mathematics, 12.07.2019 20:00
question
English, 12.07.2019 20:00
Questions on the website: 13722367