Engineering, 10.04.2020 03:38 coggonp

Learning Goal: To use fundamental geometric and statics methods to determine the state of plane stress at the point on an element of material that is rotated clockwise through an angle from the in-plane stress representation of the point on an element of material is shown. Let |σx| = 320 MPa , ∣∣σy∣∣ = 110 MPa , and ∣∣τxy∣∣ = 85.0 MPa . Use this information to represent the state of stress of the same point that is rotated through an angle of θ = 35.0 Part A - Normal and shear stress on element sectioned at plane a–a Using the element sectioned at plane a–a and the rotated coordinate system shown, determine the normal and shear stresses, σx′ and τx′y′, respectively, acting on plane a–a. Part B - Normal and shear stress on element sectioned at plane b–b Using the element sectioned at plane b–b and the rotated coordinate system shown, determine the normal and shear stresses acting on plane b–b.

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

Answer

Engineering, 03.07.2019 14:10

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Fluids at rest possess no flow energy. a)- true b)- false

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan

Answers: 3

Answer

You know the right answer?

Learning Goal: To use fundamental geometric and statics methods to determine the state of plane stre...

Questions