subject
Engineering, 10.04.2020 22:57 Nyasiabaltimore3

Forced air at 25C and 10m/s is used to cool chips on a circuit board. Consider a chip, 4mm x 4mm, located 120mm from the leading edge of the board. An empirical correlation has been established for the local Nusselt number:

Nu_x = 0.04 * Re_x^0.85 * Pr^(1/3)

Estimate the surface temperature of the chip if it is dissipating 30mW.

(Thermophysical properties of air at 25C are needed to solve this problem. Please state your reference source for this information.)

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false
Answers: 2
question
Engineering, 04.07.2019 18:10
Burgers vector is generally parallel to the dislocation line. a)-true b)-false
Answers: 2
question
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
question
Engineering, 04.07.2019 19:10
Air inially occupying a volume of 1 m2 at 100 kpa, 27 c undergoes three internally reversible processes in series. process 1-2 compression to 500 kpa during which pv constant process 2-3 adiabatic expanslon to 100 kpa process 3-1: constant-pressure expansion to 100 kpa (a) calculate the change of entropy for each of the three processes. (b) calculate the heat and work involved in each process. (c) is this cycle a power cycle or refrigeration cycle?
Answers: 3
You know the right answer?
Forced air at 25C and 10m/s is used to cool chips on a circuit board. Consider a chip, 4mm x 4mm, lo...
Questions
question
English, 25.01.2020 00:31
question
Spanish, 25.01.2020 00:31
Questions on the website: 13722367