Engineering, 11.04.2020 02:42 glori1647

The following system of equations is designed to determine concentrations (the c’s in $$g/m^3$$) in a series of coupled reactors as a function of the amount of mass input to each reactor (the right-hand sides in g/day), $$

15c_1 - 3c_2 – c_3 = 3800,
-3c_1+ 18c_2 - 6c_3 = 1200,
-4c_1 – c_2 + 12c_3 = 2350$$

Determine the matrix inverse. Use the inverse to determine the solution. Determine how much the rate of mass input to reactor 3 must be increased to induce a $$10 g/m^3$$ rise in the concentration of reactor

1. How much will the concentration in reactor 3 be reduced if the rate of mass input to reactors 1 and 2 is reduced by 500 and 250 g/day, respectively?

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:20

Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.

Answers: 3

Answer

Engineering, 04.07.2019 19:10

A)-explain briefly the importance of standards in engineering design. b)- what is patent? c)-explain the relationship between these standards: b.s. and b.s.en d)- in engineering design concepts, types of loads and how they act are important factors. explain.

Answers: 3

Answer

Engineering, 05.07.2019 19:10

Tech a says never use a water hose to clean up dust after a repair. tech b says never use a floor scrubber to clean up dust after repairs. who is correct?

Answers: 1

Answer

You know the right answer?

The following system of equations is designed to determine concentrations (the c’s in $$g/m^3$$) in...

Questions