Engineering, 14.04.2020 15:51 angieinthehouse45
A spur gearset has a pinion speed is 1120 rev/min. There are 17 teeth on the pinion and 51 teeth on the gear. The pressure angle is 20° and the overload factor Ko = 1. The diametral pitch is 6 teeth/in and the face width is 2 in. The pinion cycle life is to be 10^8 revolutions at a reliability R = 0.99. The quality number is 5. The material is a through-hardened steel, grade 1, with Brinell hardnesses of 232 core and case of both gears. For a design factor of 3, what is the capacity in HP of the pinion considering only bending. Use Ks=1.
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 15:10
If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.
Answers: 1
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 18:10
Courses that are developed by subject matter experts, internal or extemal to the college or university. these programs are marketed by the school (clo2) marks a)-vocational schools b)-vendor training c)-colleges & universities d)-continuing education programs
Answers: 2
You know the right answer?
A spur gearset has a pinion speed is 1120 rev/min. There are 17 teeth on the pinion and 51 teeth on...
Questions
Mathematics, 04.11.2020 09:00
Mathematics, 04.11.2020 09:00
Mathematics, 04.11.2020 09:10
Mathematics, 04.11.2020 09:10
Mathematics, 04.11.2020 09:10
English, 04.11.2020 09:10
Mathematics, 04.11.2020 09:10
Arts, 04.11.2020 09:10
