Engineering, 14.04.2020 18:13 Kakey1668
You are to design a microfiltration system for the community of Lastnight. The design flow rate is 0.960 m^3/s. The temperature of the water is constant throughout the year at 10. The membrane you have chosen has a maximum TMP of 230 kPa and a resistance coefficient of 3.5 x 10^12 m-1. Based on pilot testing, the operating TMP should be not greater than 75% of the maximum TMP.
a. Determine the required membrane area.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false
Answers: 2
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
Engineering, 04.07.2019 19:20
Determine the stoichiometric and actual air-fuel ratios and the mole flue gas composition for combustion with 15% excess air for raw indiana, pennsylvania raw coal.
Answers: 3
Engineering, 05.07.2019 23:20
Which one of the following faults cause the coffee in a brewer to keep boiling after the brewing cycle is finished? a. an open circuit in the heating element b. a short circuit at the terminals c. welded contacts on the thermostat d. a leak around the gasket
Answers: 3
You know the right answer?
You are to design a microfiltration system for the community of Lastnight. The design flow rate is 0...
Questions
Mathematics, 14.04.2021 19:30
English, 14.04.2021 19:30
English, 14.04.2021 19:30
Mathematics, 14.04.2021 19:30
History, 14.04.2021 19:30
Mathematics, 14.04.2021 19:30
History, 14.04.2021 19:30
Mathematics, 14.04.2021 19:30
Mathematics, 14.04.2021 19:30
