subject
Engineering, 14.04.2020 19:35 rhodesnyla01

A 12.5-kW, 230-V shunt motor has 2400 shunt-field turns per pole, an armature resistance (including brushes) of 0.18Ω, and a commutating-field resistance of 0.035Ω. The shunt-field resistance (exclusive of rheostat) is 375Ω. When the motor is operated at no load with rated terminal voltage and varying shunt-field resistance, the following data are obtained:

The no-load armature current is negligible. When the motor is operating at full load and rated terminal voltage with a field current of 0.468 A, the armature current is 58.2 A and the speed is 1770 r/min.

a. Calculate the full-load armature reaction in equivalent demagnetizing ampere-turns per pole.
b. Calculate the electromagnetic and load torques and the rotational loss at the given operating condition.
c. What starting torque will the motor produce with a field current of 0.555 A if the starting armature current is limited to 85A? Assume that the armature reaction under these conditions is equal to 175 ampere-turns per pole.
d. Design a series field winding to give a speed of 1575 r/min when the motor is loaded to an armature current of 58.2 A and when the shunt field current is adjusted to give a no-load speed of 1800 r/min. Assume the series field will have a resistance of 0.045 Ω.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
question
Engineering, 03.07.2019 15:10
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
question
Engineering, 04.07.2019 18:10
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
question
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
You know the right answer?
A 12.5-kW, 230-V shunt motor has 2400 shunt-field turns per pole, an armature resistance (including...
Questions
question
Mathematics, 02.02.2020 20:51
question
Health, 02.02.2020 20:51
Questions on the website: 13722360