subject
Engineering, 14.04.2020 19:53 leeamation31

An ideal Otto cycle with air as the working fluid has a compression ratio of 8. The minimum and maximum temperatures in the cycle are 540 and 2500 R. Account for the variation of specific heats with temperature, determine
(a) the amount of heat transferred to the air during the heal-addition process,
(b) the thermal efficiency, and
(c) the thermal efficiency of a Carnot cycle operating between the same temperature limits.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
question
Engineering, 04.07.2019 18:10
Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.
Answers: 2
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
An ideal Otto cycle with air as the working fluid has a compression ratio of 8. The minimum and maxi...
Questions
question
Chemistry, 02.09.2020 01:01
question
Mathematics, 02.09.2020 01:01
question
Spanish, 02.09.2020 01:01
question
Mathematics, 02.09.2020 01:01
Questions on the website: 13722361