subject
Engineering, 14.04.2020 21:44 jackbruski

We will feed 500 kg/hr of feed that is 30 wt% pyridine and 70 wt% water to a counter current extractor system. The solvent is pure chlorobenzene and its flow rate is 600 kg/hr. The desired outlet raffinate should contain 4 wt% pyridine. Find the composition of the exiting extract stream, flow ra

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
Burgers vector is generally parallel to the dislocation line. a)-true b)-false
Answers: 2
question
Engineering, 04.07.2019 18:20
For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.
Answers: 1
question
Engineering, 04.07.2019 19:20
Determine (a) the maximum thermal efficiency of reversible power cycles operating between a hot reservoir at 1000°c and a cold reservoir at 200°c and (b) the maximum cops for reversible refrigeration and heat pump cycies, respectively, between 28°c and 14°c.
Answers: 1
You know the right answer?
We will feed 500 kg/hr of feed that is 30 wt% pyridine and 70 wt% water to a counter current extract...
Questions
question
Physics, 30.11.2021 05:00
Questions on the website: 13722363