Engineering, 15.04.2020 01:01 swifty125
Consider a fully-clamped circular diaphragm poly-Si with a radius of 250 μm and a thickness of 4 μm. Assume that Young’s modulus is 130 GPa and Poisson’s ratio is 0.3. A uniform pressure of 20 kPa is applied.
(a) What is the stress at the center of the diaphragm?
(b) What is the radial stress at the fully-clamped edge of the diaphragm?
(c) What is the transverse stress at the fully-clamped edge of the diaphragm?
(d) What is the amount of deflection at the center of the diaphragm?
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
Engineering, 04.07.2019 18:10
Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.
Answers: 2
You know the right answer?
Consider a fully-clamped circular diaphragm poly-Si with a radius of 250 μm and a thickness of 4 μm....
Questions
English, 19.06.2020 22:57
Mathematics, 19.06.2020 22:57
History, 19.06.2020 22:57
Mathematics, 19.06.2020 22:57
