subject
Engineering, 15.04.2020 03:50 KillerMDFK7992

A photovoltaic panel of dimensions 6 m x 5 m is located on top of the roof of a house. Solar irradiation Gs = 900 W/m² is incident on the panel. The panel has an absorptivity to solar irradiation, αₛ of 0.92. The freestream air temperature is Tɪɴꜰ and the surrounding temperature for radiation exchange with the sky is Tsᴜʀʀ. For this particular problem, it is given that Tɪɴꜰ = Tsᴜʀʀ. The convective heat transfer coefficient of air blowing over the panel is h W/m²-K.
The generated electric power is provided by the following expression:
Pᴇʟᴇᴄ = αₛ Gₛ Aᴘ*(A-B*Tᴘ),
where A = 0.61 and B = 0.0014 K⁻¹. The emissivity of the panel and its absorptivity to radiation in the wavelength range of the sky temperature are both equal to 0.7. In the above equation, Aᴘ is the solar panel area and Tᴘ is the panel temperature.
Heat conduction from the panel supports to the roof can be neglected, and so can the heat loss from the back side of the solar panel.
(1) Derive an expression for electrical power generated by the panel as a function of other known quantities.
(2) Plot the electrical power produced as a function of convective heat transfer coefficient h for a fixed air temperature of Tinf = 22 °C over a range of h from 20 to 40 W/m²-K. Provide appropriate reasoning to support the observed trend.
For (2), neglect irradiation from the surroundings. On the same graph as in (2), plot the new electrical power generated as a function of h. Does the electrical power produced change substantially? Comment on why or why not.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
question
Engineering, 04.07.2019 18:20
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
question
Engineering, 04.07.2019 18:20
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
question
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
You know the right answer?
A photovoltaic panel of dimensions 6 m x 5 m is located on top of the roof of a house. Solar irradia...
Questions
question
Mathematics, 20.03.2021 07:40
question
English, 20.03.2021 07:50
question
Mathematics, 20.03.2021 07:50
question
Mathematics, 20.03.2021 07:50
question
Health, 20.03.2021 07:50
Questions on the website: 13722363