Engineering, 15.04.2020 04:40 suzy61
Estimate the equivalent 18-kip single-axle load applications (esal) for a four-lane pave- ment (two lanes in each direction) of a rural interstate highway with a truck count of 100 0 per day (including 2-axle, 4-tire panel, and pickup trucks), an annual growth rate of 5% , and a design life of 20 years. [ 2.82 x 106]
Answers: 1
Engineering, 04.07.2019 18:10
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Estimate the equivalent 18-kip single-axle load applications (esal) for a four-lane pave- ment (two...
Mathematics, 24.10.2020 23:40
Business, 24.10.2020 23:40
History, 24.10.2020 23:40
Mathematics, 24.10.2020 23:40
Mathematics, 24.10.2020 23:40
English, 24.10.2020 23:40
Biology, 24.10.2020 23:40
Mathematics, 24.10.2020 23:40
English, 24.10.2020 23:40
English, 24.10.2020 23:40
Mathematics, 24.10.2020 23:40
Biology, 24.10.2020 23:40