subject
Engineering, 15.04.2020 04:56 malaysiasc93

The town of Mustang, TX is concerned that waste heat discharged from a new up- stream power plant will decimate the minnow population in its local stream. The power plant is 35% efficient with a rated output of 350 MW, and 75% of the waste heat is discharged into the stream, which flows at 150 m3/s. Before the power plant starts operations, the stream temperature was 20◦C. If the minnows can handle max- imum stream temperatures of 22◦C, will the water be safe at the point of cooling water discharge? (Assume that the waste heat is discharged to the flow of the whole stream.)

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
question
Engineering, 03.07.2019 14:10
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
question
Engineering, 04.07.2019 18:10
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
question
Engineering, 04.07.2019 18:10
Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges
Answers: 1
You know the right answer?
The town of Mustang, TX is concerned that waste heat discharged from a new up- stream power plant wi...
Questions
question
Mathematics, 09.12.2020 04:50
question
Mathematics, 09.12.2020 04:50
question
English, 09.12.2020 04:50
question
Chemistry, 09.12.2020 04:50
question
Mathematics, 09.12.2020 04:50
question
Mathematics, 09.12.2020 04:50
Questions on the website: 13722361