Engineering, 15.04.2020 19:55 seawu

By doing some simple calculations and plotting several graphs, one can verify some of the statements made in this chapter concerning phase equilibrium and phase transitions. All the calculations should be done using the steam tables. Establish, by direct calculation, that G^L = G^V for steam at 2.5 MPa and T = 224 degree C. Calculate G^V at P = 2.5 MPa for a collection of temperatures between 225 and 400 degree C and extrapolate this curve below 224 degree C. Find G^L at 160.170. 180, 190, 200, and 210 degree C. Plot this result on the same graph as used for part (b) and extrapolate above 224 degree C. How does this graph compare with Fig. 7.3-7? Plot V versus T at P = 2.5 MPa for the temperature range of 150 to 400 degree C, and show that V is discontinuous.

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables

Answers: 1

Answer

You know the right answer?

By doing some simple calculations and plotting several graphs, one can verify some of the statements...

Questions