Engineering, 15.04.2020 20:06 ziyonsolange
A thick-walled, stainless steel (AISI 316) pipe of inside and outside diameters 25 mm and 40 mm is heated electrically to provide a uniform heat generation rate of 0.8 × 106 W/m3. The outer surface of the pipe is insulated, while water flows through the pipe at a rate of 0.1 kg/s. Evaluate the properties of the stainless steel (AISI 316) at 400 K. Assume the tube surface is smooth and use the Gnielinski correlation for the Nusselt number. (a) If the water inlet temperature is 20°C and the desired outlet temperature is 40°C, what is the required pipe length, in m?
Answers: 1
Engineering, 04.07.2019 18:10
If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79
Answers: 1
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
Engineering, 04.07.2019 18:20
Have a greater impact on maintenance productivity than any other support group. (clo5) a)-the top management b)-inventory and purchasing c)-sub-contracting d)-cmms
Answers: 2
Engineering, 04.07.2019 18:20
An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.
Answers: 3
A thick-walled, stainless steel (AISI 316) pipe of inside and outside diameters 25 mm and 40 mm is h...
English, 05.03.2020 13:15
Computers and Technology, 05.03.2020 13:16
Social Studies, 05.03.2020 13:17
Mathematics, 05.03.2020 13:17
Mathematics, 05.03.2020 13:18