Engineering, 15.04.2020 23:13 hannahpaige6347

In your first job with a large U. S based steel company, you have been assigned to a team tasked with developing a new low carbon steel alloy. In the iron-carbon system, the kinetics of the austenite to pearlite transformation obeys the Avrami relationship. In initial experimental data shows that the transformation reaches 40% completion in 13.1 seconds and 60% completion in 16.2 seconds, Determine the time (in seconds) required for the transformation in this new steel to reach 95% completion. Assume ak value of 4.46 x 104.

a. 90

b. 36.2

c. 45

d. 28

e. 25

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid

Answers: 3

Answer

Engineering, 06.07.2019 03:10

Explain the strain-hardening phenomenon on the basis of dislocation - dislocation strain field interactions. also, briefly describe what generally happens to the ductility of a metal that has been strain hardened (i.e. does strain hardening make a metal more ductile or

Answers: 3

Answer

You know the right answer?

In your first job with a large U. S based steel company, you have been assigned to a team tasked wit...

Questions