Add ‘withDebounce. v’ from the course directory to your Vivado project. Still use ‘Bouncetb. v’ as testbench, but this time, modify the name of uut in ‘Bounce_tb. v’ so that ‘withDebounce. v’is being tested instead of ‘noDebounce. v’. Run the simulation of ‘withDebounce. v’. Check theoutput waveforms. Does the counter in ‘withDebounce. v’ work as expected? Why or Why not?

In the withDebounce waveform we can appreciate that the counter in WithDebounce works as expected as we are able to see that the LED output behaves as desired, going only from 0 to 6 and not changing repeatedly alongside the changes of the bounce button

Determine the time of the day and month of the year at which the peak sensible cooling load occurs for a top floor, north-eastern corner room of an office building in durban for the following conditions: floor area: 8 x 8 x 3 m east and north walls: 115 mm face brick (outside), 20 mm air space, 115 mm ordinary brick (inside) with 15 mm plaster roof construction: suspended plasterboard ceiling, 450 mm air space, 150 mm concrete, 75mm screed, waterproofing no heat transfer across other surfaces window area 3x 1,5 m high in north wall only. ordinary glass with venetian blinds. lights and occupants : from 07: 00 to 18: 00 average light density: 25 w/m2 number of occupants : 5 seated, light office work room temperature 24°c