Engineering, 16.04.2020 03:56 nails4life324

In the Dorben Company a materials handling operation in the warehouse is being done by hand labor. Annual disbursements for this labor and for closely related expenses (social security, accident insurance, and other fringe benefits), are $8,200. The methods analyst is considering a proposal to build certain equipment to reduce this labor cost. The first cost of this equipment will be $15,000. It is estimated that the equipment will reduce annual disbursements for labor and labor extras to $3,300. Annual payments for power, maintenance, and property taxes and insurance are estimated to be $400, $1,100, and $300, respectively. The need for this particular operation is anticipated to continue for 10 years. Because the equipment is specially designed for the particular purpose, it will have no salvage value. It is assumed that the annual disbursements for labor, power, and maintenance will be uniform throughout the 10 years. The minimum rate of return before income taxes is 10 percent. Based on annual cost comparison, should the company proceed with the new material handling equipment?

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 19:10

For a process taking place in a closed system containing gas, the volume and pressure relationship is pvi-constant. -1.5 bar, the process starts with initial conditions, pi = =0.03 m3 and ends with final volume, v2-0.05 m3 determine the work done by the gas.

Answers: 2

Answer

Engineering, 04.07.2019 19:20

To design a steam turbine to produce 12,000 hp power. a engineer comsiders using a steady state stean low st 1160fr and engineer considers using a steady state steam flow at 1160°r and 450 psia to drive this steam turbine. the exhaust of the steam is cooled by the lake (vacuum). heat losing to the surroundings is measured at a rate of 555.55 btu/s. (a) sketch the system with the given conditions. (b) neglecting kinetic and potential energy changes from inlet to exit, determine the volumetric flow rate of the steam at the inlet, (ft'/hr). must clearly show unit conversions at crtical terms.

Answers: 1

Answer

Engineering, 06.07.2019 04:10

Aspherical thermocouple measurement errors a spherical thermocouple made of constantin transfer coefficient between the gas and the thermocouple is h used to measure the temperature of a gas. the heat 400 w/m2 k. calculate the maximum diameter d of the thermocouple if the thermocouple's measurement error should be w 23 within 5% of the initial temperature difference in 5 seconds. for constantin, k 8920 kg/m3, and c 410 j/kg. k.

Answers: 3

Answer

Engineering, 06.07.2019 05:10

Air contained in a piston-cylinder assembly undergoes a process from an bar. the initial pressure of 1 bar and temperature of 400 k to a final pressur initial volume of air is 0.2 m3. the process is described by pv- constant. assuming ideal gas behavior and neglecting kinetic and potential energy effects, determine the a)-mass of air, in kg b)-work for the process, in kj c)-heat transfer for the process, in kj pts

Answers: 1

Answer

You know the right answer?

In the Dorben Company a materials handling operation in the warehouse is being done by hand labor. A...

Questions