Engineering, 16.04.2020 04:56 chutchinson256

Logical variables: Running late? Complete the tunction RunningLate such that the logical variable on Time is true if no Traffic is true and gasEmpty is false. Ex >> n°Traffic = true ; >> gasEmpty-false; >onTime - Runninglate(noTraffic, gasEmpty) logical Your Function B Save C Reset EE MATLAB Documentation 1 function onTime - RunningLate (noTraffic, gasEmpty) 2 % complete the logical expression to the right of . using the variables n°Traffic and gasEmpty 4 onTime - 6 end Code to call your function C Reset 1 noTraffic true; gasEmpty true; 2 onTime-Runninglate(noTraffic, gasEmpty)

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:10

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?

Answers: 1

Answer

Engineering, 04.07.2019 19:10

The maximum shear stress and maximum flexural stress occur at the same location along a beam subjected to a non-uniform bending load. a)-trune b)- false

Answers: 2

Answer

You know the right answer?

Logical variables: Running late? Complete the tunction RunningLate such that the logical variable on...

Questions