Engineering, 16.04.2020 18:23 nataliaguadaluoupa25

A countershaft in a machine has two pulleys mounted on it for power transmission and is supported by cylindrical roller bearings at the ends. The countershaft runs at 1,500 revolutions per minute. The belt tension on the loose side of Pulley 1 is 15% of the tension on tight side. The pulleys are 50 mm wide. The bearings must have a minimum life of 90,000 hours. Design the shaft, mounting components and bearings. The design will include the following items. (1) Shaft material selection (2) Shaft diameters at critical locations along the shaft (using a factor of safety of 1.5) (3) Selection and design of the components needed for mounting the shaft and bearings (4) Selection and design of bearings

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

Answer

You know the right answer?

A countershaft in a machine has two pulleys mounted on it for power transmission and is supported by...

Questions