subject
Engineering, 16.04.2020 21:09 Nprz84

Check My Work (1 remaining) A tungsten matrix with 32 porosity is infiltrated with silver. Assuming that the pores are interconnected, what is the density of the composite before and after infiltration with silver? The density of pure tungsten is 19.25 and that of pure silver is 10.49 .

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 19:10
Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m
Answers: 1
question
Engineering, 06.07.2019 04:10
Consider a power plant with water as the working fluid that operates on an ideal rankine cycle. it has a net power output of 45mw. superheated steam enters the turbine at 7mpa and 500°c (h=3411.4 kj/kg; s=6.8 kj/kg k) and is cooled in the condenser at a pressure of 10 kpa by running cooling water from a lake through the tubes of the condenser at a rate of 2000 kg/s. (a) show the cycle on a t-s diagram (a right schematic is fine - you do not need to calculate the temperatures at each point); (b)-determine the work done by the turbine and the pump in kj/kg; (c)-the mass flow rate of water used by the power plant; (d)-the thermal efficiency of the cycle; (e)-the temperature rise of the cooling water. assume the cooling water is incompressible with cp 4.18 kj/kg°c.
Answers: 3
question
Engineering, 06.07.2019 04:10
Amixture of gases consists of 0.4 kg of oxygen, 0.7 kg of carbon dioxide, and 0.2 kg of helium this mixture is maintained at 100 kpa and 27°c. determine: (a) the apparent molecular weight of this mixture the volume it occupies (b) the partial volume of the oxygen, and (c) (d) the partial pressure of the helium
Answers: 1
question
Engineering, 06.07.2019 04:20
Consider a spherical container of inner radius , outer radius r2, and thermal conductivity k. express the boundary condition on the inner surface of the container for steady one-dimensional conduction for the following cases: (a) specified temperature of 50°c, (b) specified heat flux of 30 w/m2 toward the center, (c) convection to a medium at t with a heat transfer coefficient of h
Answers: 2
You know the right answer?
Check My Work (1 remaining) A tungsten matrix with 32 porosity is infiltrated with silver. Assuming...
Questions
Questions on the website: 13722363