3. Water is the working fluid in a Rankine cycle. Superheated vapor enters the turbine at 10 MPa, 480 C, and the condenser pressure is 6 kPa. The turbine and pump have isentropic efficiencies of 80% and 70% respectively. Determine for the cycle (a) the heat transfer to the working fluid passing through the steam generator in kJ/kg, (b) the thermal efficiency, and (c) The heat transfer from the working fluid passing through the condenser to the cooling water in kJ/kg

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k

On solidification from a melt, the polymer polyethylene forms a semi-crystalline spherulite structure. (i) sketch an individual spherulite and label the amorphous and crystalline regions. (ii) draw a schematic to show the changes in specific volume with temperature during cooling from the melt, comparing it to the theoretical extremes of fully crystalline and fully amorphous (indicate tm and tg)