The cross section at right is made of 2024-T3 (Ftu=62 ksi, E=10.5 Msi, Ec=10.7 Msi) aluminum clad sheet. Dimensions of the angle areb1=1.25", b2=1.75", t1=0.050", & t2=0.080". If the angle is 20" long, and the ends can be considered pinned, determine the critical buckling allowable Pcr for the angle & the allowable buckling stress σcr.

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives

For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.