A specific internal combustion engine has a displacement volume VD of 5.6 liters. The processes within each cylinder of the engine are modeled as a cold air-standard Diesel cycle with a cutoff ratio rc = 2.5. The pressure, temperature, and volume of the air at the beginning of compression are p1 = 95 kPa, T1 = 26◦C, and V1 = 6.0 liters. Use values of cv = 0.72 kJ/kg·K and γ = 1.38 for air. Determine: (a) the net work per cycle, in kJ. (b) the thermal efficiency η

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.