Engineering, 17.04.2020 18:38 kanamek

Sheet-metal blanks are loaded into a stamping operation by an industrial robot. Loading time is 15 sec. Actuating the OBI press takes 6 sec, including part ejection. The completed parts are dropped by gravity into a container. The cost rate of the press is $54/hr, which includes the cost rate of the robot. The sampling die cost $36,000 and is expected to produce a total of 80,000 stampings during its life. Batch quantity is 1,500 parts. Time to set up the press before production is 15 min. Assume availability = 100%, scrap rate = 0%. Determine

(a) time to complete the batch,
(b) average production rate, and
(c) cost per piece of the unit operation.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k

Answers: 2

Answer

You know the right answer?

Sheet-metal blanks are loaded into a stamping operation by an industrial robot. Loading time is 15 s...

Questions