subject
Engineering, 18.04.2020 03:52 Svetakotok

If T2 and T5 measure 20 Ω when testing the windings of a 3φ, delta-connected, dual-voltage motor with an ohmmeter, what should the reading be between T5 and T7?

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
question
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
question
Engineering, 04.07.2019 18:20
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
You know the right answer?
If T2 and T5 measure 20 Ω when testing the windings of a 3φ, delta-connected, dual-voltage motor wit...
Questions
question
Mathematics, 10.03.2021 21:30
question
Mathematics, 10.03.2021 21:30
question
Mathematics, 10.03.2021 21:30
Questions on the website: 13722367