Engineering, 20.04.2020 10:20 beetle1234
A 230 V, single-phase supply feeds the following loads: (a) incandescent lamps taking a current
of 6 A at unity power factor; (b) fluorescent lamps taking a current of 5 A at 0.75 leading power
factor; (c) a motor taking a current of 7 A at 0.7 lagging power factor. You are required to
correct the power factor to unity.
a) Show how it can be achieved by connecting a parallel reactance to the load
- provide the phasor diagram based on computed branch currents; and the power
triangles before and after power factor correction.
- provide the appropriate kVar rating of reactance, and if it’s a capacitor bank compute
the capacitance or if it’s an reactor (inductor) compute the inductance.
b) If it is proposed to use series reactance to perform power factor correction, show how this
can be achieved and comment on this approach.
d) Verify your answers using Matlab/Simulink
- show the rms currents on the Simulink model
- Plot the instantaneous branch currents and show clearly how the phase angle between
the supply voltage and supply current changes, accordingly
Answers: 1
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:20
Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options
Answers: 2
Engineering, 04.07.2019 18:20
Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false
Answers: 2
A 230 V, single-phase supply feeds the following loads: (a) incandescent lamps taking a current
SAT, 17.02.2022 14:00
Mathematics, 17.02.2022 14:00
Mathematics, 17.02.2022 14:00
Mathematics, 17.02.2022 14:00
Mathematics, 17.02.2022 14:00
Physics, 17.02.2022 14:00
Mathematics, 17.02.2022 14:00
Mathematics, 17.02.2022 14:00
Mathematics, 17.02.2022 14:00
Chemistry, 17.02.2022 14:00
SAT, 17.02.2022 14:00