Engineering, 20.04.2020 10:53 mak6156
Technician A says that a tie rod end is a ball and socket joint similar in construction to a ball joint. Technician B says that tie rod adjustment is use to set
camber. Who is correct?
A. Technician A only
B. Technician B only
C. Technician A and B
D. Neither Technician A and B
Answers: 2
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 19:10
The air in an automobile tire with a volume of 0.015 m3 is at 32°c and 140 kpa gage. determine the amount of air that must be added to raise the pressure to the recommended value of 206 kpa gage. assume the atmospheric pressure to be 128 kpa and the temperature and the volume to remain constant.[r-0.287 kj/kgk]
Answers: 3
Engineering, 04.07.2019 19:20
Air enters a horizontal, constant-diameter heating duct operating at steady state at 290 k, 1 bar, with a volumetric flow rate of 0.25 m°/s, and exits at 325 k, 0.95 bar. the flow area is 0.04 m2. assuming the ideal gas model with k = 1.4 for the air, determine (a) the velocity at the inlet and exit, each in m/s, and (c) the rate of heat transfer, in kw flow rate, in kg/s, (b) the mass kg 0.3
Answers: 2
Engineering, 04.07.2019 19:20
Acompressor compresses a gas, a pump compresses a liquid. for a given pressure ratio, why does it take more work to compress a gas in a compressor than a liquid in a pump? a)- for a given pressure ratio the average specific volume for a gas is much higher than the average specific volume for a liquid. b)- there is no difference. the only difference is the amount of heat generated (not work) c)- for a given pressure ratio the average volurge for a gas is much higher than the average volume for a liquid. d)-there is no difference
Answers: 3
Technician A says that a tie rod end is a ball and socket joint similar in construction to a ball jo...
Mathematics, 23.03.2021 16:30
Mathematics, 23.03.2021 16:30
Social Studies, 23.03.2021 16:30
Mathematics, 23.03.2021 16:30
Mathematics, 23.03.2021 16:30
Mathematics, 23.03.2021 16:30
Mathematics, 23.03.2021 16:30
Social Studies, 23.03.2021 16:30
Mathematics, 23.03.2021 16:30
Mathematics, 23.03.2021 16:30