Engineering, 21.04.2020 00:14 gungamer720
I have a signal that is experiencing 60 Hz line noise from a nearby piece of equipment, and I want to make sure that the noise is filtered out. I expect that there might be useful information at frequencies higher and lower than 60 Hz. Which would be the best type of filter for this purpose?
a. BandStop filter
b. Low-pass filter
c. Bandpass filter
d. High-pass filter
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
Engineering, 04.07.2019 18:20
Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives
Answers: 2
You know the right answer?
I have a signal that is experiencing 60 Hz line noise from a nearby piece of equipment, and I want t...
Questions
Mathematics, 27.04.2021 22:30
Mathematics, 27.04.2021 22:30
Social Studies, 27.04.2021 22:30
Mathematics, 27.04.2021 22:30
Mathematics, 27.04.2021 22:30
Mathematics, 27.04.2021 22:30
English, 27.04.2021 22:30
