subject
Engineering, 21.04.2020 04:19 Zagorodniypolina5

Reproduce Example 4.1 in Mi and Masrur: Consider a planetary gear train based transmission with an engine (carrier) providing 100kW at 2000rpm optimum operating point. The ring gear has 72 teeth and the sun gear has 30 teeth. The final drive ratio is 3.7865, and the wheel radius is 0.283m. (1) For a vehicle speed of 45mph or 20.6m/s, the power demand under heavy acceleration at this speed is 120kW. Find the speed and power for each component, assuming no losses. (2) For a vehicle speed of 70mph, or 32.7m/s, when cruising, the power demand is 70kW. Calculate the speed and power of each component

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
question
Engineering, 04.07.2019 18:20
Wiy doeres rere okhn a pump whon working betwon the same pressure range?
Answers: 2
question
Engineering, 04.07.2019 19:10
Tom is having a problem with his washing machine. he notices that the machine vibrates violently at a frequency of 1500 rpm due to an unknown rotating unbalance. the machine is mounted on 4 springs each having a stiffness of 10 kn/m. tom wishes to add an undamped vibration absorber attached by a spring under the machine the machine working frequency ranges between 800 rpm to 2000 rpm and its total mass while loaded is assumed to be 80 kg a) what should be the mass of the absorber added to the machine so that the natural frequency falls outside the working range? b) after a first trial of an absorber using a mass of 35 kg, the amplitude of the oscillation was found to be 10 cm. what is the value of the rotating unbalance? c) using me-3.5 kg.m, find the optimal absorber (by minimizing its mass). what would be the amplitude of the oscillation of the absorber?
Answers: 3
question
Engineering, 06.07.2019 03:20
Asimply supported beam abc of length l has ab of length hl and second moment of area / and bc of length hl and second moment of area i2. determine the strain energy stored in the beam when it is subject to a vertical load f at its midpoint and the consequential central deflection.
Answers: 2
You know the right answer?
Reproduce Example 4.1 in Mi and Masrur: Consider a planetary gear train based transmission with an e...
Questions
question
Advanced Placement (AP), 29.01.2021 03:00
question
Mathematics, 29.01.2021 03:00
question
Mathematics, 29.01.2021 03:00
question
Spanish, 29.01.2021 03:00
question
Mathematics, 29.01.2021 03:00
Questions on the website: 13722367