Engineering, 21.04.2020 04:30 itsmaddierae11
The steel bar has a 20 x 10 mm rectangular cross section and is welded along section a-a. The weld material has a tensile yield strength of 325 MPa and a shear yield strength of 200 MPa, and the bar material has a tensile yield strength of 350 MPa. An overall factor of safety of at least 2.0 is required. Find the largest load P that can be applied, to satisfy all criteria.
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 19:10
Aplate of dimensions 3 m x 3 m is placed 0.37 mm apart from a fixed plate. the plate requires a force of 2n to move at speed of 45 cm/s. evaluate the viscosity of the fluid in between the plates
Answers: 3
You know the right answer?
The steel bar has a 20 x 10 mm rectangular cross section and is welded along section a-a. The weld m...
Questions
Mathematics, 24.09.2020 14:01
Mathematics, 24.09.2020 14:01
English, 24.09.2020 14:01
History, 24.09.2020 14:01
Spanish, 24.09.2020 14:01
English, 24.09.2020 14:01
Mathematics, 24.09.2020 14:01
Social Studies, 24.09.2020 14:01
Mathematics, 24.09.2020 14:01
