A 2-shell passes and 4-tube passes heat exchanger is used to heat glycerin by hot water. The fouling factor of 0.0006 m2K/w occurred on the outer surface of the tube. Assume the tube wall to be very thin. How much total length of the pipe, L, is required to obtain the desired temperature?

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody