Engineering, 22.04.2020 01:41 jhernandezvaldez142

Water flows through a Xylan tube at 300 K temperature and 0.5 kg/s flow rate. The inner and outer radii of the Xylan tube is 20 and 30 mm, respectively. A thin electrical heating tape wrapped around the outer surface of the Xylan tube delivers a uniform surface heat flux of 1500 W/m², while a convection coefficient of 20 W/ m K is maintained on the outer surface of the tape by ambient air at 310 K. (a) What is the outer surface temperature of the Xylan tube? (b) What is the fraction of the power dissipated by the tape, which is transferred to the water? Please draw the thermal circuit. Assume that the thermal properties of water at 300 K are as follows: u = 1100x10kg/s. m; k = 0.555 W/m. K; Pr = 7.45. Thermal conductivity of Xylan tube is k = 0.25 W/ mK.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed.gi) ifn 1, what will happen to the material when transformed material when

Answers: 1

Answer

You know the right answer?

Water flows through a Xylan tube at 300 K temperature and 0.5 kg/s flow rate. The inner and outer ra...

Questions